E-

Standard grade


E-standard material is a widely used ordinary EPS, suitable for automatic vacuum forming machine, electric drive forming machine, traditional lifting hydraulic press. It is a standard foaming ratio raw material, which can reach a lighter density bubble particles at one time, and is generally more suitable for products with a foaming of 13 g/l or more

Details Introduction

Product introduction
 

E-standard material is a widely used ordinary EPS, suitable for automatic vacuum forming machine, electric drive forming machine, traditional lifting hydraulic press. It is a standard foaming rate raw material, which can reach a lighter density bubble particles at one time. It is generally more suitable for products with a foaming of 13 g/l or more. It is widely used in electrical packaging, thermal insulation materials, fishing float drum, handicrafts, decoration, casting disappearing mold, etc.

 

Product characteristics
 

1, fast foaming speed;
2, standard foaming ratio (ratio lower than P material);
3, low energy consumption, save steam;
4, curing time and molding cycle is short;
5, the product has good fusion;
6, the surface is smooth;
7, stable size, high strength, strong applicability, the product is not easy to shrink deformation.

 

Product specification
 

Brand

Modle

Particle Size(mm)

Primary mulitiler

Use

E standard grade

 

E-101

1.30-1.60

70-90

Electrical ceramic packaging, fishing box fruit box, vegetable box, float, crafts, disappearing mold, etc., suitable for general packaging

 

E-201

1.00-1.40

60-85

E-301

0.75-1.10

55-75

E-401

0.50-0.80

45-65

E-501

0.30-0.55

35-50

 

Related Products


B-

Rapid prototyping grade

B Rapid prototyping grade, suitable for electrical appliances packaging, ceramic packaging, fishing box, fruit box, vegetable box, float, crafts, general packaging, etc., suitable for automatic forming machine, electric drive forming machine efficiency is higher.

F-

Flame retardant grade

F-flame retardant grade has passed the United States Safety Testing Laboratory (UL) certification, document certification number E360952. F-flame retardant grade in the processing process to avoid mixing non-flame retardant substances, especially pay attention to must not be mixed with ordinary EPS, these improper processing methods will reduce the flame retardant performance.

FB-

Light flame retardant grade

Fb-light flame retardant grade material can be foamed multiple times, the apparent density of bubbles can be less than 10KG/M³, for the production of low density sheet. Fb-flame retardant grade in the processing process to avoid mixing non-flame retardant substances, especially pay attention to must not be mixed with ordinary EPS, these improper processing methods will reduce the flame retardant performance.

FS-

Flame retardant grade

The product has high strength and stable size; Using compound flame retardants, the flame retardancy of products can quickly reach B1 level; Short curing time and rapid molding can improve production efficiency and reduce production cost.

Consulting