P-

Extra light grade


P-extra light material is a widely used ordinary EPS, suitable for automatic vacuum forming machine, traditional lifting hydraulic press and all kinds of large plate machine. It is a high foaming rate raw material, which can be foamed once to achieve lighter density bubble particles, and is more suitable for multiple foams to obtain lighter foam products

Details Introduction

Product introduction
 

P-extra light material is a widely used ordinary EPS, suitable for automatic vacuum forming machine, traditional lifting hydraulic press and all kinds of large plate machine. It is a high foaming rate raw material, can be foamed once to achieve lighter density bubble particles, more suitable for multiple foaming to obtain lighter foam products, more suitable for use in a foaming 18g/l or less, multiple foaming 10g/l or less products, widely used in mechanical and electrical product packaging, thermal insulation materials, fishing float drum, handicrafts, decoration, Casting die and light impact resistant equipment, light weight large board.

 

Product characteristics
 

1, high foaming rate;
2, fast foaming speed;
3, curing time and molding cycle is short;
4, the product has good fusion;
5, smooth surface, stable material, strong applicability.

 

Product specification
 

Brand

Model

Particle Size(mm)

Primary multiplier

Multiple multiplier

Use

P extra light grade

 

P-101

1.30-1.60

80-100

180-200

Electrical ceramic packaging, fishing box fruit box, float, crafts, etc., suitable for light board

 

P-201

1.00-1.40

70-90

160-180

P-301

0.75-1.10

60-80

130-150

P-401

0.50-0.80

40-60

100-130

P-501

0.30-0.55

30-40

60-90

 

Previous Page

Next Page

Previous Page

Next Page

Related Products


B-

Rapid prototyping grade

B Rapid prototyping grade, suitable for electrical appliances packaging, ceramic packaging, fishing box, fruit box, vegetable box, float, crafts, general packaging, etc., suitable for automatic forming machine, electric drive forming machine efficiency is higher.

F-

Flame retardant grade

F-flame retardant grade has passed the United States Safety Testing Laboratory (UL) certification, document certification number E360952. F-flame retardant grade in the processing process to avoid mixing non-flame retardant substances, especially pay attention to must not be mixed with ordinary EPS, these improper processing methods will reduce the flame retardant performance.

FB-

Light flame retardant grade

Fb-light flame retardant grade material can be foamed multiple times, the apparent density of bubbles can be less than 10KG/M³, for the production of low density sheet. Fb-flame retardant grade in the processing process to avoid mixing non-flame retardant substances, especially pay attention to must not be mixed with ordinary EPS, these improper processing methods will reduce the flame retardant performance.

FS-

Flame retardant grade

The product has high strength and stable size; Using compound flame retardants, the flame retardancy of products can quickly reach B1 level; Short curing time and rapid molding can improve production efficiency and reduce production cost.

Consulting